Letöltések

DosFlash v1.3 beta

Szerző xboxhacker
Szerző weboldala http://www.xboxhacker.net/index.php?topic=8788.0
Ismertetés DosFlash can be used to read/write/erase the flash chips of most CD/DVD-ROM drives that have a mediatek chipset installed. DosFlash is for DOS flashing, DosFlash32 for Windows flashing.

Original Features:
* flashes IDE and SATA drives
* supports parallel and serial flash chips
* flash drives in Windows with direct port access
* no vendor cdb flashing commands are used
* tested with the following drives:
- TS-H943A MS25, MS28
- SH-D162C
- SH-D163A
- and some other drives like Liteon, Hitachi, ...
* NEC drives are not supported, cause they have no mediatek chipset installed

v1.1 changelog:
* DosFlash.typ modified for better BenQ support
* DosFlash16 Flash Manufacturer and Device ID screen output restructured
* flash chips are first erased before writing starts
* DosFlash32 no reenable of DVD-ROMs in device manager after flashing, this means you can't see drive and maybe have to activate it manual again in device manager, this could give better compatibility and hopefully no more blue screens

v1.2 changelog:
* bug fix for BenQ recognition
* manufacturer and device id are sometimes 0x00 for a correct installed switch
* this issue is fixed with an additional ATAPI device reset before the mtk vendor intro is sent

v1.3 changelog
- BenQ optimization in unlocking the flash chip, it should now be possible to read/write/erase the flash without any soldering or wire tricks, the drive is polled for the correct mtk unlocking status after power on, this only works for VIA cards and NForce boards atm
- DosFlash32 has one additional parameter, if you start it with the parameter "EnableDrives" all the DVD-ROMs are enabled in device manager after flashing, this could give BSOD on some systems, therefor you need to create a DosFlash32 link and add that parameter manual to use it
- DosFlash16 has one additional parameter "Send ATAPI Device Reset" in manual mode, this could give better chances for soft flashing on some VIA - motherboard combinations
- better support of Intel chipsets, drives can now be flashed if the controller is not set to native mode in the BIOS
- the following controller list includes vendor and device IDs that are hardcoded to identify the controller type (IDE or SATA), this is needed if the BIOS uses IDE ports like 0x01F0 or 0x0170 as SATA and not as IDE channels, this list is NOT related to soft flashing
- the following chipset support is added
- VIA cards
- all VIA cards with a 6420 chipset
- IDE Controllers
- NVIDIA nForce 2 IDE Controller
- NVIDIA nForce 4 IDE Controller
- Intel ICH9
- Intel ICH (i810,i815,i840)
- Intel ICH0
- Intel ICH2M
- Intel ICH2 (i810E2,i845,850,860)
- Intel C-ICH (i810E2)
- Intel ICH3M
- Intel ICH3 (E7500/1)
- Intel ICH4 (i845GV,i845E,i852,i855)
- Intel ICH5
- Intel ESB (855GME/875P + 6300ESB)
- Intel ICH6 (and 6) (i915)
- Intel ICH7/7-R (i945, i975)
- Intel PIIX3 for the 430HX etc
- Intel PIIX4
- Intel PIIX4 for the 430TX/440BX/MX chipset
- Intel PIIX
- SATA Controllers
- NVIDIA nForce 4 SATA Controller
- NVIDIA nForce 2 SATA Controller
- NVIDIA nForce 3 SATA Controller
- NVIDIA nForce MCP04 SATA Controller
- NVIDIA nForce MCP51 SATA Controller
- NVIDIA nForce MCP55 SATA Controller
- NVIDIA nForce MCP61 SATA Controller
- Intel 82801EB (ICH5)
- Intel 6300ESB (ICH5)
- Intel 82801FB/FW (ICH6/ICH6W)
- Intel 82801FR/FRW (ICH6R/ICH6RW)
- Intel 82801FBM ICH6M
- Intel Enterprise Southbridge 2 (631xESB/632xESB)
- Intel 82801GB/GR/GH (ICH7, identical to ICH6)
- Intel 2801GBM/GHM (ICH7M, identical to ICH6M)
- Intel SATA Controller IDE (ICH8)
- Intel Mobile SATA Controller IDE (ICH8M)
- Intel SATA Controller IDE (ICH9)
- Intel SATA Controller IDE (ICH9M)
Kép nincs elérhető kép
Méret 131kB
Dátum 2007 október 28 vasárnap - 10:47:12
Letöltések 90
Letöltés
Értékelés
0/5 : Nincs értékelve